Newer posts are loading.
You are at the newest post.
Click here to check if anything new just came in.
mammut
1139 ab6e 500
Tags: DIY
mammut
0406 4861
Tags: DIY
Reposted fromkarmacoma karmacoma viayetzt yetzt
mammut
4636 b1b8
Tags: DIY
Reposted fromasalluhi asalluhi viakruemelmonster kruemelmonster
mammut
6471 04e9 500
Tags: DIY
Reposted fromhalpert halpert viaCarridwen Carridwen
mammut
mammut
9448 0438
Tags: DIY
Reposted fromHumorMeSilly HumorMeSilly viayetzt yetzt
mammut
2503 b4ff
Tags: DIY
Reposted fromNeutrum Neutrum viaCarridwen Carridwen
mammut
Tags: DIY
Reposted fromlamborg lamborg viayetzt yetzt
mammut
4219 03f3
Tags: DIY
Reposted frombiru biru viaDIY DIY
mammut
4447 400b
Tags: DIY
Reposted frompterodactor3000 pterodactor3000 viaDIY DIY
mammut
6070 dca0
Tags: DIY
Reposted fromfungi fungi viaDIY DIY
mammut
2075 04cf 500
great party table
Tags: DIY
Reposted frombecurious becurious viaCarridwen Carridwen
mammut


Raspberry Pi Cluster



My goals for this project were as follows:

  • Build a model supercomputer, which structurally mimics a modern supercomputer.
  • All hardware required for the cluster to operate is housed in a case no larger than a full tower.
  • Parts that are likely to fail should be easy to replace.
  • It should be space-efficient, energy-efficient, economically-efficient, and well-constructed.
  • Ideally, it should be visually pleasing.

I feel I have met these goals with my design.

Here are the specifications of the final system:

  • 40 cores Broadcom BCM2835 @700 MHz
  • 20 GB total distributed RAM
  • 5 TB disk storage – upgradeable to 12 TB
  • ~440 GB flash storage
  • Internal 10/100 network connects individual nodes
  • Internal wireless N network can be configured as an access point or bridge.
  • External ports: four 10/100 LAN and one gigabit LAN (internal network), 1 router uplink
  • Case has a mostly toolless design, facilitating easy hot-swapping of parts
  • Outer dimenions: 9.9″ x 15.5″ x 21.8″.
  • Approximate system cost of $3,000. (The first one cost slightly more.)
Tags: DIY
Reposted byyouamSirenensangdeletemeenoniqphintech
mammut

Resin inlaid chestnut shelves

var imagebase='file://D:/Program Files (x86)/FeedReader/'; Resin inlaid chestnut shelves (19 Pics) 13:13 11.08.2014, Maxx, World Of Technology Big old cracked, knotholed, spalted piece of chestnut we got cheap from the timber yard. Time to tidy it up and make it good to go on the wall.
Sealing the holes with aluminium tape.
Set it somewhere good and level otherwise the resin will be a mess.
Ready to mix
Bag of pigment. Traditionally resin inlay is colour-matched to the wood, but I'm going down a different path.
Resin mixed up and standing a little to let the bubbles bubble out. Told you this wasn't a traditional inlay.
Poured into the big crack.
Doing a bit of a Clever with this edge.
Awwww yeah. This is going to look amazing. Now only the long, long job of planing, carding and sanding this lot flat.
Getting there.
The first coat of oil.They got about eight thin coats of boiled linseed oil.
Chopped up and ready for the wall.
Brackets installed.
Some spare bits of walnut for the other brackets.
And here they are. In daylight.
Later in the day, as it's getting darker, the glow resin really starts to come into its own.
It's on the bottom of the top shelf, so it's visible in normal use.
Wall robot approves.
Another angle. Now we just need some jars of pickles and stuff to fill these up with.
Tags: DIY
Reposted fromlockes lockes viaCarridwen Carridwen
mammut
mammut
Tags: DIY
Reposted fromrixx rixx viayetzt yetzt
mammut
8721 76f3 500
Tags: DIY
Reposted fromparkaboy parkaboy viaekelias ekelias
mammut
3824 c59b 500
Tags: DIY
Reposted fromoopsiak oopsiak viaekelias ekelias
mammut
Play fullscreen
plastic bottles into plastic rope 
Tags: DIY
Reposted frompulperybka pulperybka viayetzt yetzt
mammut
3759 80df 500
Tags: DIY
Reposted fromJamalus Jamalus viaCarridwen Carridwen
Older posts are this way If this message doesn't go away, click anywhere on the page to continue loading posts.
Could not load more posts
Maybe Soup is currently being updated? I'll try again automatically in a few seconds...
Just a second, loading more posts...
You've reached the end.

Don't be the product, buy the product!

Schweinderl